ANTI-LOCK BRAKING SYSTEM — Removal and Installation — Front and Rear Sensors
BR-35parts diagramRemoval and Installation
CAUTION
Be careful not to damage sensor edge and sensor rotor teeth.
FRONT WHEEL SENSOR
| Specification | Value |
|---|---|
| Front-sensor bracket bolt(s)Sensor bracket to strut / knuckle (two locations on the figure). | 18 - 26N·m (1.8 - 2.7 kg·m, 13 - 20 ft·lb) |
| Front-sensor bracket bolt (lower)Lower bracket bolt. | 11 - 16N·m (1.1 - 1.6 kg·m, 8 - 12 ft·lb) |
Front-sensor bracket bolt(s)Sensor bracket to strut / knuckle (two locations on the figure).
18 - 26N·m (1.8 - 2.7 kg·m, 13 - 20 ft·lb)
Front-sensor bracket bolt (lower)Lower bracket bolt.
11 - 16N·m (1.1 - 1.6 kg·m, 8 - 12 ft·lb)
REAR SENSOR
| Specification | Value |
|---|---|
| Rear-sensor wire-clamp boltSensor harness clamp. | 4.3 - 5.9N·m (0.44 - 0.60 kg·m, 3.2 - 4.3 ft·lb) |
| Rear-sensor mounting boltSensor body to differential carrier. | 18 - 26N·m (1.8 - 2.7 kg·m, 13 - 20 ft·lb) |
| Drive pinion nutCompanion-flange retention — see PD section. | 186 - 294N·m (19 - 30 kg·m, 137 - 217 ft·lb) |
Rear-sensor wire-clamp boltSensor harness clamp.
4.3 - 5.9N·m (0.44 - 0.60 kg·m, 3.2 - 4.3 ft·lb)
Rear-sensor mounting boltSensor body to differential carrier.
18 - 26N·m (1.8 - 2.7 kg·m, 13 - 20 ft·lb)
Drive pinion nutCompanion-flange retention — see PD section.
186 - 294N·m (19 - 30 kg·m, 137 - 217 ft·lb)
IMPORTANT
Remove rear sensor rotor with companion flange after propeller shaft removal. Refer to PD section.