FRONT DISC BRAKE (CL18VB, CL25VA) — Rotor — Inspection
BR-17prose procedureInspection
RUBBING SURFACE
Check rotor for roughness, cracks or chips.
RUNOUT
Adjust wheel bearing preload. Check runout using a dial indicator.
| Specification | Value |
|---|---|
| Rotor repair limit — Maximum runoutTotal indicator reading at center of rotor pad contact surface. | 0.07mm (0.0028 in) |
Rotor repair limit — Maximum runoutTotal indicator reading at center of rotor pad contact surface.
0.07mm (0.0028 in)
THICKNESS
| Specification | Value |
|---|---|
| CL18VB — Standard thickness | 18.0mm (0.709 in) |
| CL18VB — Minimum thicknessReplace rotor if below this value. | 16.0mm (0.630 in) |
| CL25VA — Standard thickness | 22.0mm (0.866 in) |
| CL25VA — Minimum thicknessReplace rotor if below this value. | 20.0mm (0.787 in) |
CL18VB — Standard thickness
18.0mm (0.709 in)
CL18VB — Minimum thicknessReplace rotor if below this value.
16.0mm (0.630 in)
CL25VA — Standard thickness
22.0mm (0.866 in)
CL25VA — Minimum thicknessReplace rotor if below this value.
20.0mm (0.787 in)