REAR DISC BRAKE (CL9H) — Rotor — Inspection
BR-22prose procedureInspection
RUBBING SURFACE
Check rotor for roughness, cracks or chips.
RUNOUT
Check runout using a dial indicator.
IMPORTANT
Make sure that axial end play is within the specifications before measuring. Refer to section RA.
| Specification | Value |
|---|---|
| Rotor repair limit — Maximum runoutTotal indicator reading at center of rotor pad contact surface. | 0.07mm (0.0028 in) |
Rotor repair limit — Maximum runoutTotal indicator reading at center of rotor pad contact surface.
0.07mm (0.0028 in)
THICKNESS
| Specification | Value |
|---|---|
| Rotor repair limit — Minimum thicknessReplace rotor below this value. | 8.0mm (0.315 in) |
Rotor repair limit — Minimum thicknessReplace rotor below this value.
8.0mm (0.315 in)