POWER STEERING OIL PUMP — Disassembly and Inspection (Pulley & shaft)
ST-29prose procedureDisassembly
CAUTION
Parts which can be disassembled are strictly limited. Never disassemble parts other than those specified.
Disassemble in as clean a place as possible.
Clean your hands before disassembling.
Do not use rags; use nylon cloths or paper towels.
Follow the procedures and cautions in the Service Manual.
When disassembling and reassembling, do not let foreign matter enter or contact the parts.
IMPORTANT
Remove snap ring, then draw pulley shaft out.
CAUTION
Be careful not to drop pulley shaft.
IMPORTANT
Remove oil seal.
CAUTION
Be careful not to damage front housing.
IMPORTANT
Remove connector.
CAUTION
Be careful not to drop spool.
Inspection
PULLEY AND PULLEY SHAFT
If pulley is cracked or deformed, replace it.
If an oil leak is found around pulley shaft oil seal, replace the seal.
If serration of pulley or pulley shaft is deformed or worn, replace it.