TIMING BELT
EM-9parts diagramCAUTION
a. Do not bend or twist timing belt.
b. After removing timing belt, do not turn crankshaft and camshaft separately because valves will strike piston heads.
c. Make sure that timing belt, camshaft sprocket, crankshaft sprocket and belt tensioner are clean and free from oil and water.
Parts DiagramFig. fig1
| Specification | Value |
|---|---|
| Crank angle sensor bolt | 14 - 19N·m |
| Front timing belt cover bolt | 7 - 8N·m |
| Tensioner pulley bolt | 22 - 29N·m |
| Idler pulley bolt | 31 - 42N·m |
| Crankshaft pulley bolt | 142 - 152N·m |
Crank angle sensor bolt
14 - 19N·m
Front timing belt cover bolt
7 - 8N·m
Tensioner pulley bolt
22 - 29N·m
Idler pulley bolt
31 - 42N·m
Crankshaft pulley bolt
142 - 152N·m
NOTE
Number of cogs between timing marks.
Marked cog positions on belt: 39, 3, 2, 1, 48, 47, 46 (upper diagram); 3, 2, 1 (lower diagram).